Jump to content

btmaldon

Regular Member
  • Posts

    636
  • Joined

  • Last visited

  • Days Won

    33

Posts posted by btmaldon

  1. If it is running rich I am suprised one of the sensors hasn't picked it up and put the Engine Management light on.

    It may be worth putting a scanner on it to see if any codes come up.

    Alternatively stick some Cataclean in it and take it for an Italian Tune Up.

    • Like 1
  2. I can understandyour frustration however I cannot see how changing the tyres would have caused that. The peeling does not look like it is the result of damage from scratching or chipping. It does look like a poor laquer finish to me peeling from the inside of the wheel.

    Its definately not caused by corrosion as you have pointed out and can only be as a result of a poor coating of laquer imo. Someone else may have a different point of view however.

  3. I cant find any one having experienced this. There must be a sensor not picking up the fact that the roof is fully down. Have you tried opening the roof with the remote. If you have the facility you should be able to make the windows go up just by continuing to hold the remote for a few seconds after the roof has fully opened.

  4. If you mean the suspension measure the gap between the top of the rear wheel and the arch when the cars on level ground. The n do the same when its parked on a hill nose first. The gap should increase. You can probably see it increase without the need to measure the gap.

    If you mean the self levelling headlamps (if you have them), you can see these adjust as you drive at night up and down hills.

×
×
  • Create New...

Forums


News


Membership