Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

The Rds Casette Plyer

stevo

By stevo,
in BMW 3 Series Forum

 Share

Recommended Posts

stevo Newbie

stevo

Posted
Posted

can anyone answer my question i have a 1998 3 series bmw s reg it has a original rds cassette deck installed but also says that it has been preprepaired to take a multi disc player my question is does this mean that the wiring is already installed and that all i have to do is plug the player in or is it more complicated than this if wiring is installed how do i find it have looked in the boot but could not find any obvious wiring and no sign of a connector please could anyone help thanx

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 7

      E90 320i Help With OBD II Port

      Morning Tino INPA/ISTA should recognise Chassis and ECU data and harvest it automatically, well mine does. I get Chassis information, Engine and any history recorded Just sitting with a Coffee studying the wiring diagrams up to 2007 and 2007 shows a resistor symbol in connector X13376 at Pin 1 Green/brown trace 2007-2009 shows no resistor symbol anywhere X13376 connector appears to be part of the vehicle access system it links to the DME Pin 2 Black/green trace that is part of the Start system Later today I will try and talk to an ex neighbour who is now a senior guy in BMW see if he can find any more help Dave
      Greydog in BMW 3 Series Forum
    2. 7

      E90 320i Help With OBD II Port

      Hey Dave 👋 I'm back! I'm wondering if the resistor is causing software not to be able to communicate with the ECU because the initial connection is normally established. The issue is when further communication starts then it just falls off and goes dead. Even with INPA, I borrowed a laptop with INPA from a friend that works on BMW's and it's acting strange. INPA sees ignition on all the time once OBD adapter is connected with a light on at all times on the adapter. The light on adapter stays on until getting into any sub menu. For example, E90>Engine>N45/N46. The light goes out and when entering the engine option menu I get an error "Group file : D_MOTOR. IFH-0009: NO RESPONSE FROM CONTROLUNIT. Program will be stopped!" After pressing okay it takes me back go the main menu. Also, when entering the "Functional Jobs" menu, and trying to enter the E90 menu I get the error "Language variants do not match. Malfunction possible!" After pressing okay it takes me to the E90 Menu under functional jobs. When I try to press on identification or vehicle data I get the message "no response from the control unit." I want to note that whenever I enter a new menu the adapter light blinks rapidly for a few seconds like it's showing me some type of data communication is happening then it just stops. I'm wondering if the settings of INPA need to be configured a particular way in order for it to communicate with this BMW or if a module has gone bad. Hmm, maybe I need to test the resistor to make sure it's fine. Maybe just get rid of the resistor all together? I'm not sure what it's purpose is but if all other E90's can operate without it then I'd imagine it'll work without em as well but not gonna jump to any conclusions yet.
      TinoTheGreek in BMW 3 Series Forum
    3. 20

      Help with 2014 X3 RDC and TPMS

      Hi Greydog, Thanks for your time checking on the i-Carsoft unit! I will be looking to obtain a copy of the ISTA then! Best, JC
      • 1
      • Thanks
      JCNY in BMW X3 Series Forum
    4. 20

      Help with 2014 X3 RDC and TPMS

      Morning JC Borrowed my neighbours i-Carsoft last evening and it does a lot more than I thought but sadly not with the RDC. So that's not the one Normally you need to erase the old chassis number or last 7 digits then ignition off wait a few minutes ignition on and check it's cleared then enter your information From what I have read online guys using Foxwell have had some success but for me I would look for a Copy of ISTA with it's leads (mine came from ESYS years ago) one of our sons friends brought a copy 2 years ago from the Bay £110 I helped him get it up and running on his Win 10 Laptop, downloaded a Virtual Machine Win7 then loaded the program to that, the only faff was loading the drivers took 3 try's. It works really well and like mine allows full Dealer level access for Diagnostics and Programming Good Luck Dave
      Greydog in BMW X3 Series Forum
    5. 20

      Help with 2014 X3 RDC and TPMS

      Thank you Greydog for your help! Yes, the Maxi unit reprogrammed the RDC but it does not correctly erase the old RDC coding data. That’s why it only work until I stopped the car. Now I know I need another tool to get the job done. 🙂 I will be waiting for your answer! Thanks!
      JCNY in BMW X3 Series Forum

  • Recent Achievements

    • Week One Done
      bmwfish
      bmwfish earned a badge
      Week One Done
    • Rookie
      JCNY
      JCNY went up a rank
      Rookie
    • Conversation Starter
      Matt_S
      Matt_S earned a badge
      Conversation Starter
    • First Post
      StaffordSteve
      StaffordSteve earned a badge
      First Post
    • Week One Done
      StaffordSteve
      StaffordSteve earned a badge
      Week One Done

×
×
  • Create New...

Forums

News

Membership