Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Faulty Alarm ???

Spannerdog

By Spannerdog,
in Audio/Video/Electronics/Security

 Share

Recommended Posts

Spannerdog Apprentice

Spannerdog

Posted
Posted

Come on then you brainy beggars..here's a question for ya.

According to Maneul (the Spanish waiter)it says that when I lock my 740 with the remote then it should set the alarm with the following indications.

1. indicators and repeaters give one flash

2. red "alarm active" light on the dash flashes whilst active.

I get neither of these indications

Has my alarm lost its coding or some other thing that it needs to activate??

Link to comment
Share on other sites
pikey Collaborator

pikey

Posted
Posted

like dabsy said, it could just be the battery tbh. i had an issue with 1 of our work vans the other day (rear door not opening, then would, locking and unlocking with 1 touch of fob.....tbh it was acting very peculiar to say the least.......anyway it was the battery :rolleyes: :D

Link to comment
Share on other sites
Spannerdog Apprentice

Spannerdog

Posted
  • Author
Posted

All the doors lock and unlock as normal, according to the manual the three button key gets charged whilst its in the ignition so I doubt if its that.

the car works fine, everything works except the "alarm active" indications, I'm not really that worried at the moment as I don't live in high risk area and the car can be locked, perhaps I'll pop to my local BMW dealership and see if I can pick their brains without getting charged a small fortune.

Link to comment
Share on other sites

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      BMW 125i E88 - Passenger Mirror Fault (RHD)

      Hi all, During some fault diagnosing, I've come across a fault (009CC4) on the passenger mirror side (UK). It apparently has to do with some comms being disturbed. I've tried to clear the fault but it keeps returning. I'm wondering if the fix is to replace the glass or to somehow check if there is power at the connectors that plug into the glass. Not sure how to check if there is power going into the glass, so my first reaction would be just to replace the glass, but then again without knowing the cause it may not solve the problem. If anyone has come across the cause and fix for this then I'd appreciate some help please. Thanks
      AAJS in BMW 1 Series Forum
    2. 6

      LED adaptive headlight / high beam failure warning

      Karl If you have a seized level sensor arm either change it or lubricate it as it really could be your issue. Fix faults first other wise trying to reset Fault Codes is a waste of time as they will just return. As I understand it each Headlamp has 3 modules (1) a main Headlamp module (2) a Headlamp Control Module (3) a Cornering Module make sure the plugs are clean unplug them a spray with Contact Cleaner and reconnect making sure they are seated correctly Then try disconnecting the battery to clear faults Dave
      • 1
      • Like
      Greydog in The Owners Club General Discussions
    3. 6

      LED adaptive headlight / high beam failure warning

      Evening, I'll be disconnecting the battery in the morning and will report back. Flashing the high beam a dozen times clears the error. Also the last vehicle check report shows rear headlamp levelling sensor rod seized. Maybe a cause. I'll check the directory if battery disconnection doesn't do the trick. Cheers Karl
      Karlos70 in The Owners Club General Discussions
    4. 6

      LED adaptive headlight / high beam failure warning

      I have the same issue on my 340i (17 plate). It first started last winter occasionally. No problems during the summer, but now it is every time it rains or has rained, particularly if cold and dark. If I use high beam it works fine, but then I may start to get adaptive headlight failure warning (again as far as I can see the adaptive headlights still work). Would love to know if disconnecting the battery works. I figured a loose connection or that a rodent keeping itself warm in my engine bay has had one nibble too many on one of the wires. Cheers Gareth
      G1000 in The Owners Club General Discussions
    5. 6

      LED adaptive headlight / high beam failure warning

      Hi Karl As the lights are working and from your description correctly it could be a plug or pin that's a little gungy or possibly a software glitch There is a register of BMW Specialists check it for ones near you I would check them out and get a proper diagnostic scan done as warnings are often a symptom not the cause. The Battery disconnect is actually something that Dealers do to clear faults so may work. Dave
      Greydog in The Owners Club General Discussions

  • Recent Achievements

    • Reacting Well
      G1000
      G1000 earned a badge
      Reacting Well
    • Week One Done
      AAJS
      AAJS earned a badge
      Week One Done
    • One Month Later
      AAJS
      AAJS earned a badge
      One Month Later
    • First Post
      G1000
      G1000 earned a badge
      First Post
    • Conversation Starter
      Paul Ibb
      Paul Ibb earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership