Lowering Hmmmm

[KES]

came across a set of 2nd hand but new unused HR springs for the 320 . On checking the part numbers against a webb site they appeat to be the dight ones .http://www.motorsportworld.co.uk/framefix.asp?productcode=PS-120289&PID=1434002

It says which model they will fit including models fitted with the M Tecnic suspension which mine has .

In note 63 it says veicles fitted M Tech may drop less but there is a chance of getting a lot less than new .

Should I or should'nt I <_<

[G4VHD]

Do it, you will never look back, trust me lol

[KES]

Gav not should or should'nt fit a kit . Do I risk getting these springs to find they are no shorter than what ever &#33;Removed&#33; length the M Technic springs are . All I managed to find out the shocks are the sames as in the Z3

[G4VHD]

Have you a side on photo of your car?

[KES]

From playing around with some cardboard 450/20 wouild seem right but if I go for those it will be budget springs

[G4VHD]

I brought 40 40 springs for mine, my rear is lower than yours quite a bit.

The front is lower too.

Your don't seem as high as min was before i lowered her, but is defiantly higher than mine now...

Ill find you a pic

hold on

[G4VHD]

[KES]

This was with the 16's on

[G4VHD]

Deffo lore than mine was, them springs your looking at will make a difference though dude

[KES]

Gav yer image is'nt showing but I have seen a pic of your 18's on .

Ok I will let the auction run its course and have a pop.