Jump to content

Brake Booter For A 1984 633Csi

REG 633

By REG 633,
in BMW 6 Series Forum

 Share

Recommended Posts

REG 633 Newbie

REG 633

Posted
Posted

I ordered a brake booster for my bmw, the part came with two o-ring, but the instructions didn't explain where the o-rings go. This is my second booster, after installing the first one it leaked fluid, I need help.

REG633

  • 1 month later...
IanIOM Experienced

IanIOM

Posted
Posted

If I am Correct the 633 is on the E12 platform, Think i need some photos as i Have played with the early braking systems for a while! post up some photos of the unit and parts and we will get it sussed

Guest DazH

Guest DazH

Posted
Posted

If I am Correct the 633 is on the E12 platform, Think i need some photos as i Have played with the early braking systems for a while! post up some photos of the unit and parts and we will get it sussed

E24

Use RealOEM to reveal all my friend :)

http://realoem.com/b...197&hg=34&fg=25

Get back to myself or Ian if you need any further help

Daz

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 4

      DPF Cleaning fluid

      Hi guys here's the latest. I drove to Glasgow and back today. Around 40 miles of dual carriageway each way and kept the revs between 2500 and 3000 approx. I kept it in fourth gear as much as possible. I also kept an eye on the temp which hovered between 68 and 74 degrees each way. My son in law put his Carly on it while I was there and cleared the EGM light and the DPF fault. the DPF returned on the way home but not the EGM. When I purchased this car 7 years ago it had the DPF light on and it turned out the problem was solved by replacing a faulty thermostat which was preventing the engine regenerating due to low running temperature. I think it warrants investigation as it cured the problem then. Any other thoughts? thanks Paneuro.
      paneuro in BMW 5 Series Forum
    2. 0

      Z4 5 speed auto transmission problem

      Recently acquired a 2.2ltr 2005 Z4 at a price which I could not resist if though it had little or no drive through the transmission. Diagnosed a fluid leak so off came the sump, changed the fluid filter, fitted a new gasket and a new transmission seal to the output shaft put it back in only to find a pool of fluid on the garage floor the next day. My only thoughts now are that the fluid pump may be leaking so I should change the gasket on this as well? Anyone else encountered this problem before? I welcome any advice/suggestions as to how to fix this issue.
      B1g4nt in BMW Z3 & Z4 Series Forum
    3. 0

      Oil leak from turbo outlet flange (B47, 320d G21)

      Hi everyone, I’ve noticed an oil leak coming from the turbine outlet flange area on my BMW 320d xDrive G21 (2019, B47 engine). The oil seems to be coming from the joint between the turbocharger and the downpipe. Has anyone had a similar experience? Any help or experience with a similar issue would be really appreciated. Thanks in advance!
      andy1316 in BMW 3 Series Forum
    4. 4

      DPF Cleaning fluid

      Thanks guys, I'm going to give it the beans a bit tomorrow and see how that goes. I'm trying to get into the secret menu just to get an idea if it does a regeneration while I'm driving it hard. I will let you know how it goes. Thanks Paneuro.
      paneuro in BMW 5 Series Forum
    5. 4

      ECU Testing & Repair Recommenadations Wilts Area

      Hi there just thought I would give you an update regarding my ecu. I sent it to ecutesting as recommended unfortunately they couldn't do anything with it as they said that that they didn't have equipement or tech old enough to test it with lol. They were very apologetic and sent it back to me. Additionally they didn't know of anywhere else I could send it to for testing but of the checks they did do they didn't find anything untoward. So it looks like I will have to find somewhere else or risk buying a second part either way a little bit frustrating.
      riber3 in BMW 3 Series Forum

  • Recent Achievements

    • Conversation Starter
      B1g4nt
      B1g4nt earned a badge
      Conversation Starter
    • One Month Later
      Worchrista
      Worchrista earned a badge
      One Month Later
    • Conversation Starter
      andy1316
      andy1316 earned a badge
      Conversation Starter
    • Conversation Starter
      vdm66
      vdm66 earned a badge
      Conversation Starter
    • Conversation Starter
      Alan Sirota
      Alan Sirota earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership