Need Help Asap Some.one.good.with Mech Problems
-
Latest Topics
-
9
e36 Horn works only on right spoke (not on left, not on central)
Top Man thanks for the close out to the post- 1
-
- eu spec
- contact failure
- (and 2 more)
-
2
Engine cut-out on idle.
I agree with Greydog. have a look around the MAF sensor. A split between this and the engine block will give erratic air mixture. also, check the battery voltage … my x5 sometimes starts rough idling and revving when it’s a bit low and throws a throttle position sensor fault at me. -
1
Tapping
Hi Daniel Welcome to the Forum Your tapping noise could be a number of things from a sticking hydraulic lifter to a failing chain tensioner. What is the service history ? Extended service intervals can cause issues get the Chain tensioner checked/changed would be a starting point Dave -
9
e36 Horn works only on right spoke (not on left, not on central)
Hello, solved like in the picture. Just enlarged the holes in the copper pieces to let the plastic guides in the pad to slip inside them. It works.- eu spec
- contact failure
- (and 2 more)
-
1
Tapping
Hello after some advice 2012 petrol m getting a tapping noise at cold start up goes after a couple of minutes done 71000 is this normal
-
-
Recent Achievements
-
Recommended Posts
BMW Official Store
Sponsored Ad
Name: eBay
BMW Model: BMW Store
BMW Year: 2024
Latest Deals
BMW Official Store for genuine BMW parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.