Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Locking issue and passenger rear window doesn’t come down

Abraar

By Abraar,
in BMW 1 Series Forum

 Share

Recommended Posts

Abraar Newbie

Abraar

Posted
Posted

Hi guys! 
 

I’ve just got my hands on a BMW 1 Series 120D and noticed that the driver door doesn’t unlock/lock with the fob. 
 

Also, the back left passenger door lock when I try lock/unlock jumps up and down a few times and takes a few times for it to get unlocked. 
 

Last issue is the back right passenger window doesn’t come down from either of the switches. 
 

Has anyone faced these issues before, any help would be great 🙂 

Link to comment
Share on other sites
Greydog Grand Master

Greydog

Posted
Posted

Morning Abraar

Welcome to the Forum

First do you have a second key to try? If that makes no difference then you clearly have faulty components a Scan with a BMW capable Diagnostic would give more accurate information. Simple things first swap the rear door window switch with the other side (it will plug in but wont fit in the door don't force it) if the window works you know it's the switch if not it seems you need to get a new lift mechanism. Your description would indicate a new Actuator needs fitting, last the Drivers door actuator needs testing as does the switch module.

As said the help of a BMW specialist at least with the proper Diagnostic's would save a lot of time if you can't do it yourself

Dave

Link to comment
Share on other sites

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      BMW 125i E88 - Passenger Mirror Fault (RHD)

      Hi all, During some fault diagnosing, I've come across a fault (009CC4) on the passenger mirror side (UK). It apparently has to do with some comms being disturbed. I've tried to clear the fault but it keeps returning. I'm wondering if the fix is to replace the glass or to somehow check if there is power at the connectors that plug into the glass. Not sure how to check if there is power going into the glass, so my first reaction would be just to replace the glass, but then again without knowing the cause it may not solve the problem. If anyone has come across the cause and fix for this then I'd appreciate some help please. Thanks
      AAJS in BMW 1 Series Forum
    2. 6

      LED adaptive headlight / high beam failure warning

      Karl If you have a seized level sensor arm either change it or lubricate it as it really could be your issue. Fix faults first other wise trying to reset Fault Codes is a waste of time as they will just return. As I understand it each Headlamp has 3 modules (1) a main Headlamp module (2) a Headlamp Control Module (3) a Cornering Module make sure the plugs are clean unplug them a spray with Contact Cleaner and reconnect making sure they are seated correctly Then try disconnecting the battery to clear faults Dave
      • 1
      • Like
      Greydog in The Owners Club General Discussions
    3. 6

      LED adaptive headlight / high beam failure warning

      Evening, I'll be disconnecting the battery in the morning and will report back. Flashing the high beam a dozen times clears the error. Also the last vehicle check report shows rear headlamp levelling sensor rod seized. Maybe a cause. I'll check the directory if battery disconnection doesn't do the trick. Cheers Karl
      Karlos70 in The Owners Club General Discussions
    4. 6

      LED adaptive headlight / high beam failure warning

      I have the same issue on my 340i (17 plate). It first started last winter occasionally. No problems during the summer, but now it is every time it rains or has rained, particularly if cold and dark. If I use high beam it works fine, but then I may start to get adaptive headlight failure warning (again as far as I can see the adaptive headlights still work). Would love to know if disconnecting the battery works. I figured a loose connection or that a rodent keeping itself warm in my engine bay has had one nibble too many on one of the wires. Cheers Gareth
      G1000 in The Owners Club General Discussions
    5. 6

      LED adaptive headlight / high beam failure warning

      Hi Karl As the lights are working and from your description correctly it could be a plug or pin that's a little gungy or possibly a software glitch There is a register of BMW Specialists check it for ones near you I would check them out and get a proper diagnostic scan done as warnings are often a symptom not the cause. The Battery disconnect is actually something that Dealers do to clear faults so may work. Dave
      Greydog in The Owners Club General Discussions

  • Recent Achievements

    • Reacting Well
      G1000
      G1000 earned a badge
      Reacting Well
    • Week One Done
      AAJS
      AAJS earned a badge
      Week One Done
    • One Month Later
      AAJS
      AAJS earned a badge
      One Month Later
    • First Post
      G1000
      G1000 earned a badge
      First Post
    • Conversation Starter
      Paul Ibb
      Paul Ibb earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership