The problem from our customs: I am having problems setting up having problem communicate with ICOM it’s not connecting so I need to get help from you

Solution way: upgrade the firmware, please refer to the steps below.

Step 1：

Step 2：

Step 3：

Step 4:
Enter the BMW ICOM address of the first step,
Such as: http://169.254.92.38:60080
Must remember to add to the port (:60080)

Step 5:
A login window will pop up after connecting to ICOM
Username: root
Password: NZY1150263 (Note: case sensitivity）

Step 6：
Enter the ICOM internal setting interface, select the “Update Fireware” function to start the firmware upgrade

Step 7:
Original firmware version
Enter the firmware upgrade function menu, click “Browse” to find the upgrade firmware file

Step 8:

Step 9:
First select the file of ICOM-BootImage and open it

After selecting the firmware file, click “send the file”. At this time, because the file will be transferred from the computer to ICOM, the browser will freeze and wait for the next interface.

Step 10:
Click yes, and start to upgrade ICOM-BootImage, the upgrading the browser also will stuck, don’t move, wait for the next interface to appear

Step 11:

Wait until the interface comes out
Click “Update Fireware” to return to the firmware upgrade interface

Step 12:
Click to browse again

Step 13:
Choose ”ICOM-ApplicationImage” file and open it

Step 14:

Click “APPLICATION”
Then click “Send the file”, and it will be stuck, but the next interface will appear after a moment

Step 15:
Click”YES” and start to update”ICOM-ApplicationImage”

Step 16:
Click”reboot” and reboot
When this interface appears, the upgrade is complete.

Step 17:
ICOM restarting, close the browser

I think you are asking for help in the wrong Forum

This is a BMW owners Forum not a software forum, you need help from the Software writers/suppliers with the "Set Up" procedure.

Looking at your pictures a Chinese speaking computer engineer would help.

It may be cheaper to buy a copy of ISTA/INPA

Sorry I can't help

Dave