Hi all

My 135i has had a new downpipe and intercooler, and is now making 386BHP and 403ibs/foot, and I want to upgrade the clutch.

My longer term plans are to get the care to around 450bhp. Any advice on best performance cltches?

cheers

 

Morning Nick

Things are getting serious in the engine department, with your planned future power hike have you searched for a twin plate upgrade ?

I had a highly tuned Cosworth Sapphire in the early 90's 400+hp the clutch was Sachs unfortunately as happened in those days the Cos was stolen !! So I can't give any information on clutch life never had it long enough. It was replaced with a Lotus Carlton that was the last manual car I owned.

Good Luck keep us updated (well me really)

Dave

 

 

On 4/17/2021 at 7:19 AM, Greydog said:

Morning Nick

Things are getting serious in the engine department, with your planned future power hike have you searched for a twin plate upgrade ?

I had a highly tuned Cosworth Sapphire in the early 90's 400+hp the clutch was Sachs unfortunately as happened in those days the Cos was stolen !! So I can't give any information on clutch life never had it long enough. It was replaced with a Lotus Carlton that was the last manual car I owned.

Good Luck keep us updated (well me really)

Dave

 

 

Thanks for the advice Dave. I will take a peek at some twin plated upgrades.

On 4/19/2021 at 10:03 PM, nickBMW said:

Thanks for the advice Dave. I will take a peek at some twin plated upgrades.

Well after much research I went for the SPEC BMW N54 SPEC-Design Single Mass Flywheels (8-Bolt) / Aluminium × 1 and the SPEC BMW N54 SPEC-Design Clutches Stage 3 from ML performance. The stage 3 clutch allows for up to 570 lbs, which is reassuring. Just need to find a reputable fitter now.....hahahah

Thanks for the update Nick 

What about talking to the folks at West Surrey Racing they prepare and run the BMW's in the BTCC they may be helpful if not in fitting in direction to look

Dave