Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

h6w led bulbs

lepastrychefbimmer

By lepastrychefbimmer,
in BMW 1 Series Forum

 Share

Recommended Posts

lepastrychefbimmer Rookie

lepastrychefbimmer

Posted
Posted

I looking for led bulbs for side lights error free have tried a set twice as thought first set was faulty but was sent replacement and still having error 'eror code' any help would be appreciated

kind regards rhys  

Greydog Grand Master

Greydog

Posted
Posted

Morning Rhys Welcome to the Forum

They need an inline resistor, normally the "error free" lamps have it built in clearly not the case for you? You can buy the line resistors separately, one per lamp. If you put the original bulbs back does the error go?

How ever you should be able to buy "Canbus Error Free" items from a good Motor Factors, Halfords (worth a try) or online from someone like HID's direct (my preference) then of course Ebay (but often origin uncertain)

Dave

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      Inherited an R56? 2009 ONE

      Well… we have a freind at church who has been struggling with the car and I haven’t ever had time to look at it. So, we upgraded the Peugeot to a Porsche and felt it right to gift her the Peugeot. in return, I have taken the mini and intend to spend some time on it before gifting it to someone else who needs a car. drove it home and it had more lights than Blackpool.! spent an hour or so tinkering and I have got it down to two issues. The air filter needs replacing and it is showing a code of 2983 inlet cam sensor. im going to order me a Bosch one and hopefully the engine will run a lot better… after its had a tank of redex! any other suggestions or things I should look for?
      X5smw in 2001 Onwards Mini Forum
    2. 1

      Need help identifying burnt part

      Morning Dan Welcome to the Forum As it isn't a BMW Part I am not sure there will be help here, unless a member on here has come across the same issue Maybe Google to see if there is a Harmon Kardon Forum to see if they have more information Good Luck Dave
      Greydog in Audio/Video/Electronics/Security
    3. 1

      1996 750i

      Following further conversation with the owner, he has corrected me to say its a September 1995 model. 5.4ltr V12 SWB. Apparently there were very limited numbers of this model in right hand drive. Any interest of advice please let me know.
      victormeldrew in BMW 7 Series Forum
    4. 1

      X1 gearbox service

      Morning Cornel Welcome to the Forum Your Gearbox is ZF GA8HP45Z which I believe ZF advise should be serviced every 60 to 100000 km dependent on environment and use (Climate Towing etc) If you feel like teasing your local BMW Dealer service manager ask him if it's sealed for life why do BMW have a gearbox service kit on their parts list 😅 Transfer case is ATC 35L Personally if it is running well and at the low miles you have it isn't an urgent priority. 12 years is a stretch I would look for a good Independent or better a ZF Transmission Specialist if you can't DIY Dave
      Greydog in BMW X1 Series Forum
    5. 1

      Need help identifying burnt part

      Need help identifying burnt part on water damaged Harman Becker amplifier. Part # 9320214 - model BE B220. I am trying to repair this unit and one component is burnt beyond recognition. It has 4 pins and is SMD package. Attached are pictures of where the component is on the PC board. If anyone has an amplifier that is model BE B220 or similar and could take a high resolution picture of the component so I can get the SMD code from it I can look it up.
      DDMORE in Audio/Video/Electronics/Security

  • Recent Achievements

    • Week One Done
      Richcj
      Richcj earned a badge
      Week One Done
    • One Month Later
      Richcj
      Richcj earned a badge
      One Month Later
    • First Post
      victormeldrew
      victormeldrew earned a badge
      First Post
    • Week One Done
      Von
      Von earned a badge
      Week One Done
    • Conversation Starter
      DDMORE
      DDMORE earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership