All Activity

Morning Richard Welcome to the Forum When you say "maximum" tyre depth are you looking at the side wall (between the ground and the wheel rim) ? Those tyre sizes are correct for the wheels you have, however depending on build spec and country 16" wheels fitted with 205x55x16 front 225x50x16 rear or 225x45x17 front 255x40x17 rear (Note both theses options also came as a set of 4 wheels same as the front size) 18" were also available in225x40 front and 255x35 rear If you are considering a wheel change check care fully the the new wheels fit with the brakes on your car If you are asking because you are finding the ride hard/harsh then there are some additional things to check Suspension starting with springs (are they stock) Shock Absorbers as they age they may harden in action Suspension Bushes these are rubber and again harden and crack giving a harsh jolty ride Hope this helps not hinders 😁 Dave

I currently have a 325i 2011 coupe with 19 inch rims and 225/35 tyres on the front and 255/30 on the rear (not run flat) could anybody tell me what the maximum depth tyre i can have please?

Hi, Just bought a 2019 X5 M50D. On the original build sheet it came with a display key but the key has been lost. I was just looking for advice on whether you can get a secondhand one and get it coded? BMW are charging £600 for a replacement thanks.

Can you open the boot to reach the battery? use this terminal to put power to the car so you can open the boot and jump it from the battery itself if I remember correctly

Thank you I was thinking that bolt on the bottom left but am nervous to do damage if it is not correct!

Try these two!

Unfortunately this is not what mine looks like 😞

Hi. if it’s the same as this one… the red capped terminal is the positive and the bolt circled is the negative/chassis/ground…. This is the one you need!

Hi. I am feeling really foolish but I am having a hard time finding the correct bolt for the negative. Is someone able to provide photos for me? I have looked at the manual and that is not very clear and have spent way too much time on the internet searching. I am hoping someone here can help quickly. I custom ordered my dream car in 2014 and it only has 20,000 miles on it. I love it but I do not drive it near enough and now lost with a dead battery!

Morning David I think Stu was referring to the Oil Filler Cap not the Oil Filter Depending on how competent you are with spanners the codes you have indicate Vanos issues it could be just the sensor or it could be the actual vanos mechanism is sticking. Clearing a code doesn't fix an issue just resets it, if replacing the Vanos Sensor doesn't fix the problem the the Vanos mechanism needs removing cleaning and servicing new seals etc. If not you need a Garage/Mechanic who can do the work for you Dave

Changed the oil filter insert was fine

Hi Stuart Welcome to the Forum There are after market cameras the fit like the OEM ones in the trunk/boot lid release handle spot it is linked through the PDC but you may need a video handling unit? I t depends on the cars original spec Dave

It’s linked to the vanos sensor. but firstly, check the oil cap is the correct one and there should be an insert in it.

Had fault codes 130716 p1523 p13c9 changed oil filter and Vanos actuator on exhaust side cleared codes drove for about 30 miles parked overnight then engine light came back while driving to work. I keep clearing the code p13c9 as that’s the only code showing on my reader ( cheap one) going to do an oil change then look at changing the camshaft sensor anyone came across this??

After many months of messing with door i decided to try, again, the key in the door after about 10 tries THE DOOR OPENED!!! So I can finally get door panel off to access and replace the actuator. Thank you to everyone that responded and tried to help me. And to Greydog...I found the lever you were talking about.

Hi Meggy. You can install one to the x6 if you have a compatable head unit. If not, you can get aftermarket stereo systems which have camera inputs I’m not familiar with the 6 series, but it may be possible that the wiring look is already installed and just needs a camera fitting and enabled. stu

Can you install a reverse camera to a X6

Hello Michelle. someone is selling a pair on eBay… https://ebay.us/m/YoEja0 is this what you are looking for? Stu

Hi Jerry You say Shocks, arms, springs OK what about Anti Roll Bar bushes and links ? Have you checked the Sub Frame mounts ? Also worth checking the engine mounts ? Is the Engine reinforcement plate in place and tight. As you feel it in the footwell my best guess is Anti Roll Bar bushes Dave

I am wanting to buy a good condition black leather seat for my 1998 z3

morning, here again after bit of investigation shocks, arms,springs ok ,but got constant thud coming from passenger front footwell now I'm startingto feel it around drivers feet 20mph ,iknow it's not wheel balance because comes in at such low speeds ,what do we think cheers jerry

Hi Steve As the car is still under warranty why not get the Dealer to sort it ? It may be simple "a learning process for you and the car" or possibly a software upgrade ? Dave

I have 2025 X3 I have created a profile for myself and then I set up another profile as ‘driver2’ when I use my key it picks up my profile but does not show my 2nd profile I have tried to set it up again but it shows on the screen as driver 2 is already set up but I cannot find the profile anywhere any help is much appreciated

Thanks for the reply. It's passenger and rear doors and tailgate, but only occasionally. I'll look at a replacement actuator and see if that solves the issue. 👍

Welcome Paul. is it all the doors stay locked at the same time or a random one? my Porsche’s rear right started doing it and it turned out to be the door actuator. if it’s all at the same time every time, I would look at the relays as it’s giving a signal to all doors. Random 1 door will be getting the signal but failing to actuate