Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Need To Borrow Some Alloys

d_a_n1979
 Share

Recommended Posts

d_a_n1979 Contributor

d_a_n1979

Posted
Posted

I'm going to get my Style 32's refurbed ASAP in the New Year and wanted to see if anyone could lend em a set of alloys (ideally with legal tyres) that'll fit my 7 series E38 for a week or so

I work from home so very few miles would be put on them; just need them so I can leave my alloys with the refurbisher and be able to use the car as necessary until I pick the Style 32's back up.

More than happy to pay for a courier to collect & send back etc... Just saves the hassle of having to buy another set to do the same job

Not bothered if they're the OEM 16" alloys or other 18" alloys or what condition they're in etc... In saying that I've got one OEM 16' alloy so may only need 3 of those!

Thanks

Dan

Link to comment
Share on other sites
Guest DazH

Guest DazH

Posted
Posted

I don't have any to lend ya but, if your planning on getting rid of that OEM 16", I might be able to take it of your hands ;) My 7 has no spare wheel.....

Good luck on your hunt!

Daz

Link to comment
Share on other sites

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      BWM 216D F46 Issue.

      I am getting the following issue for my turbo. Totally my turbo is not working. I am the 2nd owner and the current milage i took over from 90k and now under me, it is 175k. My mech says it highly likely is a turbo charger issue with the internal valve being stuck. Any one encounter this issue?
      GixxerRaider in BMW 2 Series Forum
    2. 0

      Engine bonnet release latch not working properly

      Hi, My 120i bonnet release latch is difficult to open the bonnet. It just started causing me problems. The handles comes right up but does does open the bonnet, I need to try it about 5 times and I am worried I will break the plastic latch. My question is there a way to tighten the cable or should I just replace the cable, if so how easy is it to replace myself. All suggestions greatly appreciated.
      Joseph80 in BMW 1 Series Forum
    3. 2

      New member

      Thanks very much for welcome, I've done the history search via BMW dealer and there's none there! As the one previous owner was a sales manager for a large franchise, I'm thinking they did the servicing but maybe didn't have access to the BMW system to update it. I'm getting it serviced at main dealer next month and that will allow me to purchase a warranty from BMW or possibly elsewhere as BMW warranty dept pretty useless so far. Just back from 3 days in Yorkshire and it is an amazing car to drive for sure! Cheers Dave
      • 1
      • Thanks
      davecullen6 in New Members Welcome
    4. 2

      2016 M240 "lumpiness" at steady low speed

      Thanks Dave, it's just noticeable at that lower steady speed, higher steady speeds it doesn't seem t happen, there is an occasional hesitancy to accelerate when 'floored' mind. Think the scan step is required!
      Sussex Kev in BMW 2 Series Forum
    5. 3

      645ci coolant

      Morning Rob 1st The temperature sender in the water pump housing is dual purpose it sends a signal to the DME which interprets that for both Oil Temp and Water Temp I would change it when changing the Thermostat If the Aux Water Pump isn't recirculating coolant, (1) is the Coolant level correct (2) You can hear the Aux Pump running but it doesn't seem to be moving coolant so check the Coolant valve on the nearside inner wing (not uncommon for these o fail) Is the noise the Vacuum pump (constant) or the Emissions air pump stops after a short while? If all sensors are operating as they should there could be a problem with the cluster it is better to repair the original if you can there are a few companies who do it ECU Testing or Cartronix come to mind. Good luck Dave
      Greydog in BMW 6 Series Forum

  • Recent Achievements

    • Conversation Starter
      GixxerRaider
      GixxerRaider earned a badge
      Conversation Starter
    • First Post
      davecullen6
      davecullen6 earned a badge
      First Post
    • First Post
      Sussex Kev
      Sussex Kev earned a badge
      First Post
    • Conversation Starter
      davecullen6
      davecullen6 earned a badge
      Conversation Starter
    • Conversation Starter
      Sussex Kev
      Sussex Kev earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership