Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Hi Guys,, Got Problems

newquaymarc

By newquaymarc,
in BMW 7 Series Forum

 Share

Recommended Posts

newquaymarc Newbie

newquaymarc

Posted
Posted

hi all, ok just bought a 1995 750il

but have a few probs.

got phone working ok now so that no longer a problem

but still cant sort out rear blind,, it worked once the day i bought car but not since, all fuses ok

also memory seats not working, but now and then i drive away and !Removed! seat n steering wheel seem to go to defaut setting. leaving me hanging on for dear life to sterring wheel. but i have tried the memory buttons on door but no luck, the M button does not light up or accept new settings.

also when i put the lights on i get a buzzing thru the rear door speaker

help i woried this will happen on motorway.... is there anyway i can disable seat electrics once it set?

cheers happy to burn fuel for the hell of it

Link to comment
Share on other sites

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      Parking Break Failure

      Hi , Just replaced rear pads on my f25 , now i have a message saying parking break failure , do i need to reset anything ? , or could i have mist something .
      Darrenscollins in Add A Suggestion
    2. 1

      650i crank no start

      Afternoon Hans Welcome to the Forum I would start with a Diagnostic Scan but then I do have ISTA/INPA on my lap top. Without it I would start by testing the sensors that will effect fuel and spark. Number one Crank position sensor if it is faulty no signal to the DME no signal to the injectors. While testing sensors Fuel Pressure sensor next, while the fuel rail is pressurised is it correct if the pressure sensor is dead the DME will assume no fuel present. Also carefully check the loom to injectors and coil packs not unknown for it to be damaged. Try a Google search for test parameters for the sensors. Also check engine earth straps Hope this helps Dave
      Greydog in BMW 6 Series Forum
    3. 1

      Suspension upgrade

      Morning Robin Welcome to the Forum By the sound of things you need a coil over kit for standard ride height with adjustable shocks. Playing with bump and rebound settings should allow a more supple ride, though wheels and tyres are a big part of the overall equation. Bilstien are a well established reliable name that has been around for years so if the kit has been developed for the car should be a good choice, lots of other kits out there with a wild price range but personally suspension tyres and brakes really are not worth cutting corners with. Dave
      Greydog in BMW 4 Series Forum
    4. 1

      Suspension upgrade

      Hello all. I have a 2019 M Sport+ 440i. I am looking for suggestions to upgrade the suspension. I do not want it lower or stiffer. I am looking for more control, predictability and less harshness. At under 20k miles, there are no faults with the factory suspension, I believe it could be better. I don't drive the car hard, its more like fast touring. I am aware of the Bilstein system that Birds BMW have developed, does anyone have experience of this system? Any alternative suggestions would be appreciated.
      Rob Charles in BMW 4 Series Forum
    5. 1

      650i crank no start

      I recently purchased a 2008 650i with a crank no start problem. There is no spark or fuel. The fuel rail is pressurized but injectors are not firing. I replaced the ivm cause it will cause a similar no start but nothing changed. I checked relays but couldn't find one for fuel Injection or spark. I couldn't see codes cause my reader was having a hard time connect. But there was rpm when cranking so I assume the cps is fine. Any guidance would be greatly appreciated.
      Hans fassnidge in BMW 6 Series Forum

  • Recent Achievements

    • Conversation Starter
      Hans fassnidge
      Hans fassnidge earned a badge
      Conversation Starter
    • Conversation Starter
      Rob Charles
      Rob Charles earned a badge
      Conversation Starter
    • One Month Later
      jezza
      jezza earned a badge
      One Month Later
    • One Year In
      LesAshmore
      LesAshmore earned a badge
      One Year In
    • Conversation Starter
      Droffilc
      Droffilc earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership