-
Latest Topics
-
0
2007 525i
I have a problem with my 2007 525i erratic idle I scanned the vehicle came up with code 1415 replaced the MAS New from BMW it didn’t work service engine light went light came on I put my old Sensor in no light on just erratic idle need help please. Just frustrated I did have the starter replaced about 2 months ago I was at work and I couldn’t do it myself I think the problem may be there but repair facility refuses to look into it for something they might have been missed thank you -
0
Bmw 635d edition sport soft top with 85000 miles for sale
Bmw 635d soft top for sale 85000 miles on clock -
0
No boost and strange noise
I'm hoping someone can give me a few pointers. I have a 2012 E84 25D and recently I've been getting the following intermittent codes: 4862 Air System, Air to EGR Mass Flow, Plausibility 4873 Exhaust-Gas Recirculation Cooling, Plausibility 4530 Charing Pressure Control, Control Deviation The car drove fine, no loss of power. I removed the EGR and Cooler to check them and there was very little carbon and both clear. Both were replaced around 10k miles ago under the BMW recall. The car has now gone into limp mode and is making a weird noise when reved. It's quite at idle but makes a lowish pitched drone or whining noise when the engine is reved. It's not a high pitched whine that I would associate with the bearings in the turbo. I had a fondle of the turbo spindle when I had the intake pipe removed. It spins freely and I cant feel any play in the bearings. The car has only done 55,000 miles and has a full service history with oil changes every 4,000 miles so I'm hoping the turbo hasn't failed already. I thought I'd try and check out the control system first. I looked at the parts diagram for the turbo vacuum control and started trying to check things. Connected a vacuum gauge on the supply side and the vacuum appears steady so I don't think there is a leak on the supply side or vacuum tank. I removed the vacuum line from the part labelled Vacuum box (15) on the parts diagram and the droning/whining noise stops. I connected a syringe to the Vacuum box and as i draw a vacuum the noise returns. Turned the engine off and used the syringe to draw a vacuum while feeling the actuator arm under the vacuum box and the arms moves/returns freely when a vacuum is applied/released. I can't work out what this vacuum box operates. The actuator arm passes down through the exhaust manifold and is connected to the turbo. Can anyone tell me what this does or suggest any next steps to try and diagnose the problem? Thanks Jim -
0
Boost gauge help
Hey im trying to fit a boost gauge to my bmw 1 series 116d , 200bhp And wondering if anyone has done before and could show us where and what hose to cut hose and fit extension and run a hose through fire wall to the gauge. -
3
X5 E53 fuel gauge sender unit ... HELP needed
I would think after 2 years if they haven't sold they have binned it 😁 Dave
-
-
Recent Achievements
-
Recommended Posts
BMW Official Store
Sponsored Ad
Name: eBay
BMW Model: BMW Store
BMW Year: 2024
Latest Deals
BMW Official Store for genuine BMW parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.