Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Replacement Floor mats for G31

JamesP

By JamesP,
in BMW 5 Series Forum

 Share

Recommended Posts

JamesP Rookie

JamesP

Posted
Posted

Hi all, I bought a 2020 G31 a month ago and I’d like to replace at least the driver’s floor mat or all of them. I do like the OEM ones but don’t want to pay full price from BMW for replacements. What other options has anyone used? I do like how they have the Velcro patches on the reverse so ideally any alternatives would have the same. Thanks in advance for any suggestions. I’ve purchased 3rd party mats for other vehicles in the past and have always been disappointed. Thanks again. 

Greydog Grand Master

Greydog

Posted
Posted

Morning James

Google the Register of BMW Dismantlers (Quarry Motors have always been useful). For my E53 4.6is I used a local Carpet Fitter he made up a full set for me all edges trimmed and including non slip velcro patches. He used the OEM mats as patterns and off cuts from a Dark Grey High Quality Wilton carpet he had fitted, cost was less than half OEM gave the car a new smell for ages.

Dave

  • Thanks 1

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      Inherited an R56? 2009 ONE

      Well… we have a freind at church who has been struggling with the car and I haven’t ever had time to look at it. So, we upgraded the Peugeot to a Porsche and felt it right to gift her the Peugeot. in return, I have taken the mini and intend to spend some time on it before gifting it to someone else who needs a car. drove it home and it had more lights than Blackpool.! spent an hour or so tinkering and I have got it down to two issues. The air filter needs replacing and it is showing a code of 2983 inlet cam sensor. im going to order me a Bosch one and hopefully the engine will run a lot better… after its had a tank of redex! any other suggestions or things I should look for?
      X5smw in 2001 Onwards Mini Forum
    2. 1

      Need help identifying burnt part

      Morning Dan Welcome to the Forum As it isn't a BMW Part I am not sure there will be help here, unless a member on here has come across the same issue Maybe Google to see if there is a Harmon Kardon Forum to see if they have more information Good Luck Dave
      Greydog in Audio/Video/Electronics/Security
    3. 1

      1996 750i

      Following further conversation with the owner, he has corrected me to say its a September 1995 model. 5.4ltr V12 SWB. Apparently there were very limited numbers of this model in right hand drive. Any interest of advice please let me know.
      victormeldrew in BMW 7 Series Forum
    4. 1

      X1 gearbox service

      Morning Cornel Welcome to the Forum Your Gearbox is ZF GA8HP45Z which I believe ZF advise should be serviced every 60 to 100000 km dependent on environment and use (Climate Towing etc) If you feel like teasing your local BMW Dealer service manager ask him if it's sealed for life why do BMW have a gearbox service kit on their parts list 😅 Transfer case is ATC 35L Personally if it is running well and at the low miles you have it isn't an urgent priority. 12 years is a stretch I would look for a good Independent or better a ZF Transmission Specialist if you can't DIY Dave
      Greydog in BMW X1 Series Forum
    5. 1

      Need help identifying burnt part

      Need help identifying burnt part on water damaged Harman Becker amplifier. Part # 9320214 - model BE B220. I am trying to repair this unit and one component is burnt beyond recognition. It has 4 pins and is SMD package. Attached are pictures of where the component is on the PC board. If anyone has an amplifier that is model BE B220 or similar and could take a high resolution picture of the component so I can get the SMD code from it I can look it up.
      DDMORE in Audio/Video/Electronics/Security

  • Recent Achievements

    • Week One Done
      Richcj
      Richcj earned a badge
      Week One Done
    • One Month Later
      Richcj
      Richcj earned a badge
      One Month Later
    • First Post
      victormeldrew
      victormeldrew earned a badge
      First Post
    • Week One Done
      Von
      Von earned a badge
      Week One Done
    • Conversation Starter
      DDMORE
      DDMORE earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership