Conversion

[Chooko]

Greetings, had replace my automatic transmission with a manual 6 speeds,the clutch master have a 4pin wire… any info how to connect will be greatly appreciated 

[Greydog]

Morning Babylon

Welcome to the Forum

Not sure what your asking here as far as I am aware that there is and electrical connection for the Brake light switch. I am not aware of one for the clutch but am always willing to learn

Check www.realoem.com for the pedal arrangement normally if there is an electrical connection it will be identified then search for wiring diagrams for that part number.

Good Luck

Dave

[Chooko]

Dave ,did find the diagram for the clutch module,only one wire going to EWS (cas) was not enable to be located 

[Greydog]

Morning 

Where is your wire connected at the Clutch master cylinder cap ? or do you have a switch at the pedal pivot ?

Dave

[Chooko]

  On 12/12/2024 at 8:07 AM, Greydog said:

Morning 

Where is your wire connected at the Clutch master cylinder cap ? or do you have a switch at the pedal pivot ?

Dave

Expand  

Dave ,did find the diagram for the clutch module,only one wire going to EWS (cas) was not enable to be located 

[Chooko]

  On 12/13/2024 at 12:52 AM, Chooko said:

Dave ,did find the diagram for the clutch module,only one wire going to EWS (cas) was not enable to be located 

Expand  

The wire #4 iut of the clutch module go to number 8 on the EWS  , case solve

[Greydog]

Yay well done that man 😆

Dave