Hi there

I had an issue with the fuel gauge sender unit where the fuel level on the gauge was wrong.

 

I then checked the sender unit (on both sides) and noticed that i may need a new slider board. Please have a look at the picture attached.

Does anyone know where I can get the slider unit from ?

 

Thank you

Morning Paul

Welcome to the Forum

If you aren't aware use www.realoem.com to find correct part numbers put the last 7 digits of your Vin in the search box it will call up your model

I dont think you will get the individual parts that you have stripped your unit to but you will certainly be able to get the correct replacement part

You could try talking to someone like ECU Testing in Nottingham they may be able to assist

Dave

On 9/24/2023 at 8:02 AM, Greydog said:

Morning Paul

Welcome to the Forum

If you aren't aware use www.realoem.com to find correct part numbers put the last 7 digits of your Vin in the search box it will call up your model

I dont think you will get the individual parts that you have stripped your unit to but you will certainly be able to get the correct replacement part

You could try talking to someone like ECU Testing in Nottingham they may be able to assist

Dave

Thank you Dave.

 

I am sure that someone online was selling the resistor slider the one that i have in the Pic. 

Just need to find that

 

Thanks

I would think after 2 years if they haven't sold they have binned it 😁

Dave