Jump to content

Recommended Posts

help!!! 2007 320d,car has no boost,fault code 44cc comes up,have put a new actuator on it and turbo unit sent away and set up,replaced maf,map,boost pressure solenoid,air intake temp sensor and still no boost! can anyone please help!!! 

Link to post
Share on other sites

Hi Stuart

Welcome to the Forum

Seems like you have covered all the usual culprits. After fitting were all faults cleared down? Have the pins in the ECU been checked for continuity? Just in case its a corroded pin at the ECU

Good Luck

Dave

Link to post
Share on other sites
4 hours ago, Greydog said:

Hi Stuart

Welcome to the Forum

Seems like you have covered all the usual culprits. After fitting were all faults cleared down? Have the pins in the ECU been checked for continuity? Just in case its a corroded pin at the ECU

Good Luck

Dave

yes all faults were removed but this one keeps pinging straight back up,I have looked at the pins and there didn't seem to be any corrosion there,ill get a multimeter onto them though and check that,thanks for the info! 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Forums


News


Membership