Jump to content
View in the app

A better way to browse. Learn more.

Bimmer Owners Club - BMW Forum for BMW Owners

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Error codes 2003 E60 545

Hi guys I hope you can help I have restraint fault in red on dash & screen. Using INPA under Satellite front door left E60 version 1.040 pulled the following error codes
967D voltage monitoring ASE below lower limit
9665 Pressure sensor self test timeout
Would this be related to the Air Bag Occupancy Sensor Mat
If so can I use a bypass module to enable the clearance of the codes?
Apologies if this has been done to death previously but I could find the 2 x codes that match mine

Simple things first, battery condition has to be tip top. Make sure your battery is fully charged. Disconnect the battery, take off the door card and using a really good electrical contact cleaner get to work on all the plugs, modules and airbag connections behind the door card same under the seat for the occupancy mat. reconnect everything and reconnect the battery clear the codes start the engine and see if the codes come back. If they do swap the front door control modules if the fault moves you know it's the module if it doesn't it is probably the air bag unit. It goes without saying take care and make sure the battery is disconnected when unplugging or disconnecting airbags.

  • Author
9 hours ago, Greydog said:

Simple things first, battery condition has to be tip top. Make sure your battery is fully charged. Disconnect the battery, take off the door card and using a really good electrical contact cleaner get to work on all the plugs, modules and airbag connections behind the door card same under the seat for the occupancy mat. reconnect everything and reconnect the battery clear the codes start the engine and see if the codes come back. If they do swap the front door control modules if the fault moves you know it's the module if it doesn't it is probably the air bag unit. It goes without saying take care and make sure the battery is disconnected when unplugging or disconnecting airbags.

 

  • Author

Good evening Greydog

Many thanks for responding with some sound advice . I will certainly be doing as you advise & will get back to you with outcome

Thanking you again

rehards

geeze

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...
eBay disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase you make on eBay via the club.

DISCLAIMER: Bimmerownersclub.com is an independent BMW car forum for owners of BMW vehicles. The club is not part of BMW nor affiliated with or endorsed by the offical BMW AG in any way. The material contained in the forums is submitted by the general public, and is not endorsed by Bimmer Owners Club, BMW AG, or Bayerische Motoren Werke AG. The official website for BMW AG can be found at http://www.bmw.co.uk
Background Picker
Customize Layout

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.