Jump to content

Newbie Says Hi From Surry

Matt Parry

By Matt Parry,
in New Members Welcome

 Share

Recommended Posts

Matt Parry Newbie

Matt Parry

Posted
Posted

Hello guys , just purchased my first BMW. A very tidy E38 728i Sport with 32k on the clock, has a couple of little bits that need sorting apart from that a very nice car.

Just want to pick a few brains, I've seen these bmw software programs on eBay that allows you to find clear faults as well as program parts are these any good ? Or am I wasting my money, can anybody point me in the right direction for this software?

Many thanks.

Matt.

Guest Mr.Beemer

Guest Mr.Beemer

Posted
Posted

welcome to the forum Matt - :)

I think its a handy tool to have & will clear most faults however I have seen that they don't always pick up the correct fault.

something like ncs expert software loaded on to a laptop will be more thorough & up to notch.

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 3

      Fault codes 130716/P1523/p13c9

      Morning David I think Stu was referring to the Oil Filler Cap not the Oil Filter Depending on how competent you are with spanners the codes you have indicate Vanos issues it could be just the sensor or it could be the actual vanos mechanism is sticking. Clearing a code doesn't fix an issue just resets it, if replacing the Vanos Sensor doesn't fix the problem the the Vanos mechanism needs removing cleaning and servicing new seals etc. If not you need a Garage/Mechanic who can do the work for you Dave
      Greydog in BMW 4 Series Forum
    2. 3

      Fault codes 130716/P1523/p13c9

      Changed the oil filter insert was fine
      Davross in BMW 4 Series Forum
    3. 2

      Reverse camera

      Hi Stuart Welcome to the Forum There are after market cameras the fit like the OEM ones in the trunk/boot lid release handle spot it is linked through the PDC but you may need a video handling unit? I t depends on the cars original spec Dave
      Greydog in BMW X6 Series Forum
    4. 3

      Fault codes 130716/P1523/p13c9

      It’s linked to the vanos sensor. but firstly, check the oil cap is the correct one and there should be an insert in it.
      • 1
      • Thanks
      X5smw in BMW 4 Series Forum
    5. 3

      Fault codes 130716/P1523/p13c9

      Had fault codes 130716 p1523 p13c9 changed oil filter and Vanos actuator on exhaust side cleared codes drove for about 30 miles parked overnight then engine light came back while driving to work. I keep clearing the code p13c9 as that’s the only code showing on my reader ( cheap one) going to do an oil change then look at changing the camshaft sensor anyone came across this??
      Davross in BMW 4 Series Forum

  • Recent Achievements

    • Week One Done
      Germaine
      Germaine earned a badge
      Week One Done
    • First Post
      Davross
      Davross earned a badge
      First Post
    • Conversation Starter
      Davross
      Davross earned a badge
      Conversation Starter
    • Rookie
      kyzote
      kyzote went up a rank
      Rookie
    • Conversation Starter
      Meggy
      Meggy earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership