Snypa-D

454

Welcome to BMWOC :)

452

7 seconds !! Even So Solid Crew had 21 ;) lol And I dont know where yu guys are getting your info from,Im never naughty,always perfectly well behaved and well spoken !! And you cant prove otherwise ;)

PMA girl,PMA !!

sweet ;)

ME ?? SARCASTIC ?? NEVER !! next youll be sayin Im a trouble maker ;) lmfao

;) ;) ;) ;) ;) Theres 2 screws at the top of the clocks,undo them and pull the clocks forward,then just undo (not that easy) the plugs on the back,think there is 4 of them,then slide the clocks out.They are what I call swing arm plugs,ie theres a little arm you have to pull up to remove the plug but its got a tiny locking clip on it,so I advise when you get the clocks out you remove these locking clips altogether (just the little clips,not the arm),it makes them so much easier to remove again in future :) hope this helps

Nice one,on my watch list :) Id take the springs off and bin the rest as I got decent shocks :)

Dunno what you mean dude ;)

cheers dude :)

e36 dash bulbs are easy to take out,the dash clocks themselves are a different story,lol p.s. they not that hard tho :)

Welcome to BMWOC :) NO WAY was this posted in june !! Or if it was it musta been blocked ?? p.s. nice lookin motor,more details please (and a better pic would be nice too ;) )

Cant be arsed with em at the mo mate, just need to drop the front down ready for Belgium end of March !! Plus got other bits to do for then too :)

WANTED - WANTED - WANTED A pair of 60mm lowering springs,FRONT ONLY,for 1998 BMW e36 323ci Every manufacturer/retailer Ive tried will only sell me a SET (front and back) and I dont want a set,JUST THE FRONT !! So if anybody can help me out Id really appreciate it, thanks :)

Welcome to BMWOC :) selling already ? Hmmmmm ?

........course you will,its a BMW :)

lol,didnt mean to come across like that at all dude,just meant that flyer design,cost,printing etc is a decision that only mods can have the final say on.I remember reading somewhere on here that somebody (think it was Gav) was getting on to this but havent heard anything else since.Why not get a thread up about it and get people to put theyre ideas and designs forward,it may stoke the 'flyer fire up again ;)

Also a great selection of BMW alloys on here, http://www.hotlinety...urg7a6tp3ju2iv2 its where I got mine :)

WOW +1 lol ;)

I can get 5000 of these printed for around 50 quid (paper thickness) or if better paper/card quality is required the price goes up obviously,so drop the amount and raise the paper quality and 50 quid is still around the price.But flyers is a topic for mods to discuss and deal with !! Glad you like it tho ,thanks :)

Check all connections for moisture too

No such luck mate,they are proper tiny LEDs and the only way to do the colour change is to break the current LEDs carefully and solder new blue ones to the legs that are exposed when breaking the old ones,and theres flippin loads of them :( I soldered all the switches ok but this is far to precise for me to do,plus my iron only has a medium sized head and this job needs a tiny one.So id rather buy one already done or pay somebody to do it :)

Welcome to BMWOC :)

Welcome to BMWOC :)