Luke

Haha yeh im skint and I'll proberley use 3 tanks of fuel!

Yeh your better off just keeping the plate on.. Doesn't look right on a BMW

I ment I didn't like the BMWs in the video lol

Um about 1500 quid and iv had it since september and tbh I didn't need to spend that on her....

I don't like them lol

Highlight of my year hahahahah

Lol put your Beemer in it's place if you had a drag ;)

Fords ain't that bad gav lol I had a old school rs turbo fiesta for about 3 months but I knackered the turbo:( went like f### tho

Lol was he stoned or sumit lol replied mate

I'm !Removed! my self that was soo funny ....

I'm quiet old school and like the old escort rs turbo... My brother has a White with black wheels looks hot engines been upgraded it's got 270bhp... Chromed engine fasted car iv driven turbo is rapid

Welcome along mate

Do it andy and were get some pics and upload them :)

Welcome along mate, when you get some pics up give me a shout as Iv done enough 'tasty' mods to my and mates cars in the past :)

Yeh put are BMWs side by side you wont be able to notice the difference lol

Same here south west

Yeh all you need to do is colour code your black trims lol

Thanks guys :) And dabsy my car passed the mot last month when my airbag light was on and it was fine :)

The occupancy sensor is a very common thing to go on bmws, when the occupancy sensor does go your find your airbag light being on constantly which is annoying, now I think thus bypass occupancy sensor is really good and can save you £££s, I bought mine off eBay for 10 quid and it takes around 10 mins to fit, you must disconnect the battery and the occupancy sensor is located underneath the passenger seat and your need to take the seat out, it's a 15mm socket an there are 4 bolts, once you have taken these out I didn't take the sit completely out I just put it on it's side resting against the back seats, under Neath you will need to unclip the unit and once done will look like this The blue and white wires going into the back of the seat you need to cut and leave at least an inch of wire, strip the blue and White wire and the bypass unit you get should look like this with corsponding wires Wire the wires in with the connecting block supplied and click the unit and bypass sensor back into place, I used a cable tie to keep the bypass unit in place, bolt the seat back in place and connect the battery. Job done!!

I'll do it gav

I'm the youngest there forth I should be the last to post lol

I'll find pics on google images and do a write up gav :)

Gav said no because he's transferring it to my paypal lol

Yes well chufed with that, only took 10 mins take the passenger sit out cut a couple of wires and then wire in the bypass and presto... Done lol

No problem gav