Jonny zee

went back to local BM dealer, they insisted it was the right o ring, and gave me two new ones free of charge. fitted them the other day and left it over night, and I'm at a total head scratching point,.....it's still dripping. I'm really at the point of slapping some pegatank on it to see if it seals it, it's a bit like araldite but 10 times stronger???.

Cheers for that. I think they have given me o rings for the inside of the steering rack and not the end of the high pressure hose. I will call back at Williams b.m. tomorrow and get them to check them again.

hi Dave sorry for the late reply been down to Ewood park. yep I did try nipping up but to no avail. I will try the link you sent and look up the part no. and check it with vin number......I must admit it's not leaking as bad but still dripping....God I hate leaks. it's actually coming through the inside of the nut ,so it must be getting past the o ring.

hi chaps. baught a new power steering o ring from local dealers,I have a leak on the inlet Union on the high pressure hose that goes into pump. fitted the new o ring and it's still leaking? just wondering if they have given me the wrong o rings . anyone else had this problem, the old o ring is a greenish colour, but these new ones are black.