Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Bmw E38 728I Alloys

d_a_n1979

By d_a_n1979,
in BMW 7 Series Forum

 Share

Recommended Posts

d_a_n1979 Contributor

d_a_n1979

Posted
Posted

Hello

I have a set of 18" alloys on my 728i currently; 8J up front and 9J at the rear.

They're the multi-spoke alloys with quite a deep dish (unsure of the exact model/name)

What I'd like to know is that are these wheels that came on the 7 series and also what are the ideal tyre sizes for them?

Currently they're running 235/45/18's up front and 255/45/18's at the rear but then I look at alloy wheel websites they show tyres with alloy packages to be 235/50/45 up front and 255/45/18 at the rear?

Also; does it make sense to keep 18" alloys on the 728i or would 17's be a better compromise? I think the car came originally with 16" alloys as the spare wheel is a 16" alloy!

Thanks

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

You're ok with 45's matey... I made the mistake of using 40's on mine and it threw the speedo out (60mph at the clocks was just over 50 LOL)

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 1

      X3 2.0D 2012 F25 - tailgate struts on the way out?

      Hi Gary I did the exact job for a friend of my wife, I did a search of www.realoem.com for the correct part numbers left/right then she searched Google and brought both spindle drives for £110 delivered with 2 year warranty. Changing them requires trim removal so a decent set of trim removal tools and a Torx set will be needed. I did use a garden rake with a towel wrapped around it to support the tail gate as neither of the girls could reach 😅. The rest is straight forward, though getting all the trim out of the way is fiddly the job is plug and play. Couple of good Videos on line About 21/2 hrs work with Tea and biscuits 🤣 Dave
      Greydog in BMW X3 Series Forum
    2. 1

      X3 2.0D 2012 F25 - tailgate struts on the way out?

      Hello We have a LHD X3 we use mainly from driving from UK to Greece - the tailgate lifts perfectly well but on closing it stops halfway down - it will continue and close properly with some gentle assistance on the way down. The car was MOT'd at a BMW main dealer a couple of days back, we had a free visual inspection and I asked them to investigate the issue. As per BMW the 'motors are on their way out'. Given that their quote was shall we say rather strong (I appreciate it is a quite tedious job to replace them) my question is are the rams serviceable or are they really a replacement job?
      GAH in BMW X3 Series Forum
    3. 10

      Help with 2014 X3 RDC and TPMS

      Morning JC Look like you brought a scanner that just does TPMS systems ?? I have 2 Diagnostic scan tools (1) BMW INPA/ISTA which is the same as BMW Dealers use and (2) iCarsoft both systems will give me a code that indicates which wheel sensor is at fault or if it is the Controller. Plus of course they also read all other control units on the car. With your monitor what does the Instruction book say? does it give a list of codes and their meaning? TP sensors do fail some have batteries in them they are not expensive to buy online (Ebay, Amazon etc) the costly bit is to fit them, obviously tyres need to come off and be refitted. If it was me I would wait until tyre change time Dave
      Greydog in BMW X3 Series Forum
    4. 10

      Help with 2014 X3 RDC and TPMS

      Thanks Greydog! I have not tried the battery unplug. But I have purchased Autel TS508 to try out and it found the error below from the ODBC scan. I tried to erase the DTC from this menu and the TPM is working again until I left the car for a few hours. Does anyone know what is causing the error? Thanks!
      JCNY in BMW X3 Series Forum
    5. 3

      No boost and strange noise

      Morning Jim A Seat owned by a neighbours wife from new but only used for school run duties was completely clogged at lower miles than yours. Predictably the Dealer said new Turbo new EGR and a swathe of other parts £££, a local Diesel specialist stripped, cleaned and rebuilt everything and gave her the advice to give the car a good run at motorway speeds once a month. Years ago my son had issues with his Toyota pickup the dealer mechanic told him an "Italian Tune Up" (engine up to temp and keep revs over 2.5k for half an hour) needs doing every few weeks. As a Tree Surgeon he tended to be trundling around off road at slow speeds and low revs. With luck it's just the actuator mechanism Dave
      Greydog in BMW X1 Series Forum

  • Recent Achievements

    • Rookie
      GAH
      GAH went up a rank
      Rookie
    • One Year In
      GAH
      GAH earned a badge
      One Year In
    • One Month Later
      frankman
      frankman earned a badge
      One Month Later
    • Week One Done
      JCNY
      JCNY earned a badge
      Week One Done
    • One Month Later
      IanW5177
      IanW5177 earned a badge
      One Month Later

×
×
  • Create New...

Forums

News

Membership