Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Series 1 Soft Top Won't Go Up.

blokefromdonny1

By blokefromdonny1,
in BMW 1 Series Forum

 Share

Recommended Posts

blokefromdonny1 Rookie

blokefromdonny1

Posted
Posted

Hi. a couple of times now my soft top won't go up when I press the button and so I have had to raise it manually. The display gives no reason or fault as to why it hasn't raised. (If the boot is open or the storage shelf is not in position, the display pings and tells you why the roof isn't operating). The roof then operates normally for a time but then fails to raise. Any ideas why it's happening or how I can sort it. It just makes me a little nervous about putting the roof down anticipating it wont go up again electrically. Thanks.

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 16

      Copy Ignition Key?

      You need to remove the module from the car and scrape the microchips coating to read it. It’s not difficult if you follow the imstuctions
      X5smw in BMW X5 Series Forum
    2. 16

      Copy Ignition Key?

      Hi Norm, great news on the grandchild. Hope you had a great time. here is a video of a great step by step guide. my ews module is on the drivers side footwell… (rhs ) it’s a light grey box, looks like a cigarette box size. it’s a faff to do at the start, but once you understand how to read and write, it’s a breeze.
      X5smw in BMW X5 Series Forum
    3. 16

      Copy Ignition Key?

      Hi Stu, sorry for the delay in getting back 2U. We had the grandchild here from Ozztralia for 2 weeks. (OMG!) I got the programmer as you suggested. Can you tell me where the unit is located I plug the AK90+ unit into? Thanks, Norm.
      Norrimac in BMW X5 Series Forum
    4. 1

      2010 E84 X1

      Hi Mick Welcome to the Forum First wheel rotation if the tyres are asymetric then that will not work as you will end up with tyres turning against their rotational arrows also check your wheel if you have the same tyre sizes front and rear it's normally less of an issue. X5's the E53 in particular used to suffer with camber issues at the rear due to the lower spherical bearing failing it wore tyres on the inner edge but most of them had a much wider rear tyre set my 4.6is and E70 has 275x40x20 front 315X35X20 rear. More of a tyre/cost issue than transmission damaging though The X1 E84 has a slightly different rear axel set up but is still adjustable for both Camber and Toe. If you are competent with spanners actually changing rear bushes isn't such a difficult job the one piece of advice I would give is there are eccentric bolts for camber and toe I replace those as a matter of course to make sure everyth can be aligned properly. If you don't have one hire or borrow a bearing push/pull kit and your away. should take about 11/2hrs per side. I mark the position of the eccentric bolts with tippex so it goes back the same then when the job is done off the tyre shop that can handle 4 wheel alignment. Take a look at www.realoem.com if you aren't aware it is an online BMW parts list put the last 7 digits of your Vin into the search box then check out the rear axel section Hope this helps Dave
      Greydog in BMW X1 Series Forum
    5. 1

      2010 E84 X1

      Hi. I'm new to this. Just bought a 2010 E84 X1 and looking for advice please. I've heard that the camber of the wheels can play havoc with your drive train and also they tyre wear. Any suggestions for rotation of the wheels (no pun intended) and tread depth differences? Any help would be much appreciated. Thanks. Mick.
      Mick Burt in BMW X1 Series Forum

  • Recent Achievements

    • Week One Done
      ross1824
      ross1824 earned a badge
      Week One Done
    • Collaborator
      Norrimac
      Norrimac earned a badge
      Collaborator
    • One Month Later
      Norrimac
      Norrimac earned a badge
      One Month Later
    • Conversation Starter
      Mick Burt
      Mick Burt earned a badge
      Conversation Starter
    • Conversation Starter
      Arj
      Arj earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership