BOC Admin

How long did it take you to replace the seal ?

Personally I have never seen this occur before on a PAS pump but looking at the bolts that are used on the other pump (other forum post link) then I'm not surprised. If they are to secure a housing onto another component then they should have a shoulder along the top half of the bolt...if you use the type in the picture then they are already weakened with cutting the thread along the whole length....Wrong Bolts! Would be very interested to hear the outcome of this one.....you certainly have a guardian angel watching over you Andy.

Hi Dan...welcome to the Forum I have not experienced this fault before but think if you have been over the rear brakes then I think I would then go to the handbrake lever area and see if there is something amiss there....although not sure what you may find but has to be worth checking I guess. Let us know what you find cheers . Trevor

incredibly deep shine...definitely worth the effort !

Hi Ross....welcome to the Forum Fine looking machine you have there! Keep us updated with the mods certainly, money well spent so far Good to have you onboard Cheers, Trevor

I would suggest removing the rear light units, applying a thin coat of silicon sealant and refitting.

Hi Joe...welcome to the Forum I would probably try another dealer to see if they can resolve or even diagnose the fault...seems unacceptable for a vehicle this age. In the meantime, it may be worth seeing if there is anything in the boot area that is rolling around, otherwise it may be a bolt or assembly that has been dropped into a void during assembly and has been left there....seen it lots of times in cheaper and older vehicles. Let us know how you get on with it Cheers, Trevor