Bmw Rick

Ive had alook tonight and im missing my fog light holders and bulbs for the rear cluster.

I was so sure that my rear fogs were working but when i had alook in the boot the was no bulbs or holders sat in the cluster.This might sound daft but how does the set up work on the beemers oh and my brake light isnt working on the passenger side.I think its a strange set up i unplugged the indicator bulb out and the side light bulb went out lol.Does the electrics all run off the same panel or something

- BMWs do not share the same transmission set ups, no. Only sometimes

- I've never done it but I imagine it would be quite an easy(ish) swap. You wouldn't want too though as it would be cheaper to just purchase an E36 M3

There expensive though lol

Where does the 1996 e36 beemer pick its speedo reading from is it the gearbox?

Does all the beemer gear boxes have the same bolt holes or do they vary and this 3.2 engine will it fit in the 1996 e36 car with no issues?

I have a 1996 e36 bemmer coupe i was wonder whats the biggest beemer engine you could get under the bonnet with out chopping things about.Also is the 535 manual gearbox the same size in length as the one that bolts to the m44 box

Great price reduction for giuseppe zanotti shoe and giuseppe zanotti shoes on sale, free shipping for worldwide, full cash back promise. Free Shipping!The advantage of our Giuseppe Zanotti Shoes is high quality and low price.

You can adjust the shoes with out taking the disc off just using a flat screw driver and a torch.If you look through one the bolt holes on the disc you will see the adjuster,adjust acordingly using the torch because it is dark lol

Do volvo alloys fit the bmw e36

I have the 1.9 m44 i think its called

My plan is to swap the bemmer bell housing for the volvo bell housing and have the volvo flywheel restuded to fit the bemmer clutch

Go on real oem with ya chassis numbers and it will tell what clutch is on it.but what engine is in at present? Yes works off the abs.

I have the 1.9 m44 i think its called

Hydraulic,speedo sensor on the wheels,clutch is engine dependant!

What do you mean clutch is engine dependant? the speedo sensor is not connected to the abs is it or is it seperate?

Hey guys ben here. Was just wondering if there are any meets in the manchester area as i would love to go to one

Im in manchester and i would be interested in going to a meet

Im looking into possibilty of running my 3 series coupe with a t5 engine from the volvo 850 t5.My first hurdle is knowing what gearbox the p reg coupe uses and is it hydrolic or cable? secondly is the speedo in the gearbox electronic or mechanical also what size clutch do they use is it a 220mm or 240?,

I will give it ago in a minute lol

I will give it ago in a minute lol

Ive had a look under behind the glove box and there is no relay lol and i know what a relay looks like lol

I will give it ago in a minute lol

Yup pins 7 AND 19 are the ones to connect... Think (off the top of my wooden skull) 5 secs for oil and 10 secs for service

Thanks mate

Behind the glovebox... Have a kwik look at this...

http://www.unixnerd....uk/bmw_e36.html

Hi Dabsy i had a quick scan it doesnt really mention anything about the central locking though lol

All BMW's have a general control module (GCM), it acts like a "Supervisor" within the electrical system. Modules tend to have very little in the way of faults, but like any circuit-board, they may acquire "dry" solder joints or faulty components.

On most, if not all, there will be a light-blue "Comfort" relay under the dash, this can fail - You could either, open up the relay and inspect the solder-points, get a new one or I think the Lighting relay has identical internals you could try swapping these just to test !

Hi Dabsy where does this relay live lol under the passenger side or drivers side?

If it is full then leave it alone, if only the Red block is showing then it needs servicing + resetting...

Hi Dabsy its really low,and i think the clown that owned it before me serviced it and hasnt done any thing to reset it

If thats the service indicator...

http://www.unofficia...ice_lights.html

Paper clip......

Your a star thankyou lol

If it is full then leave it alone, if only the Red block is showing then it needs servicing + resetting...

Hi Dabsy its really low,and i think the clown that owned it before me serviced it and hasnt done any thing to reset it

When i turn the igntion on i get a rectangle bar with little sqaures in it some are green and i think some are yellow and red of the top of my head.Can you reset this ,if you can how do you do this lol

WCM or GCM is your problem if the wiring/connectors and fuses are fine... Take particular notice to whether or not the fob actually locks the car!? Or does ANYTHING... If not then there is your problem...

Hi mate whats a wcm and gcm lol

Hi ive got the electric mirrors moving lol,my problem is still the central locking ive changed the central locking motor and still nothing,im thinking it could be something electrical,ive looked in the fuse box today fuse number 7 is missing and when i stick a fuse in it blows it,but the bloke says it used to work.also on the fuse box it has to other locations for the central looking going by what it says but i carnt see any more fuse boxes.This is for the p reg 3 series beemer by the way lol

I wouldn't do that Richard :blink:

The light doesnt come on all the time either im hoping its just some thing simple mate im gonna have alook over it tomorrow

P reg should have come with ABS, I'm sure it was that year.

May have just missed it if its an early model.