Wmbbmw1977e70x5black

On ista and checking smooth running control, when reving up to 3k revs I get these figures - see picture - no smoke tho?

Hi, I’ve had to go through hell and back in the last 6 weeks, long and short is that I bought a 2011 e70 40d and was fine for a week then engine started making a horrible noise, turned out to be a spun bearings and had picked up on the shells, So I found someone to do the job but he was extremely busy with other jobs so done mine when he could.. in the end he got the engine skimmed and had to fit new rings, bearings, crankshaft etc , also new tapets and new rocket cover and head gaskets, new cam chain kit also after everything was built on the engine he had to buy a new flywheel from bmw for £450 because old one was bent and car wouldn’t go into gear, apparently the engine damaged caused the flywheel to slight bend. Anyway after the rebuild engine back in and everything running there was white smoke coming out of the exhaust a little on idle and if you took it up the road it would clear, looking on his diagnostic code reader it said that 2 of the 6 injectors were out of range and were over fuelling, we took it up the road again and the smoke cleared, the smoke didn’t come back till the next morning on first start up same again small lot of smoke then 2 minutes up the road and on to a bigger road foot down and lots of smoke then it cleared again… I didn’t have this problem before the engine rebuild , now engine has been rebuilt I’ve got this issue He tells me that the injectors have to learn Them selfs for them to run correctly I’ve paid 8.5k for the car, another 5k bill for engine rebuild 🥲 the garage that sold me it must of new something was wrong I had noticed that the rocker cover gasket was leaking later that night as smelt like oil , and it was confirmed when engine was rebuild, but did he know about the bearings going? Apparently the oil pump and filter had loads of metal in them on stripping the engine .. I’ve got 2.5 k back from him , he paid me 1.5k after I told him I broke down then another 1k after me telling him of a 4.5 k engine rebuild etc Now he has blocked me off eBay Anyhow what’s the thoughts on the white smoke , p. S car runs and drives fine No hesitation, drives fast , no smoke after it’s cleared Thanks

Ok cool

Thanks unit off yesterday i managed to leave the cables on the shoes , the cables are free not stuck on took unit off with emergency cable on it new unit on its way, would it work straight after fit if I can’t clear codes?.

Ok will try later thanks

Hi, don’t think my laptop has a slot for the cable to plug into,

This is now what it shows after changing the file to OBD in c drive Maldonado changed the settings in ista d

Thanks , can I undo the cables to the shoes on the new unit ? When I pull the free cable up in the boot , it’s loose and free , does the new unit allow for cables to be released. Never had one of these electrical hand brakes before

I’m using a normal usb one for insta d, just want to clear codes

Hi all downloaded the insta d latest version and installed it ok, I’ve put my vin in and shows me all the info but the tree box isn’t letting me click on it to show faults , using a d kcan cable with a switch on it, not sure where the switch is supposed to be on any help thanks bmw 2011 40d e70

Bought a 2011 40d e70 and the parking brake isn’t working the symbol P is on all the time where do I start with this issue?