Jump to content

Pauljones012002

Regular Member
  • Posts

    6
  • Joined

  • Last visited

Posts posted by Pauljones012002

  1. 14 hours ago, Greydog said:

    Hi Paul

    Still can't see the Video message says missing Codec not sure if that's on my laptop or your Vid !!

    You need to take out the binnacle with the speedo rev counter etc, the connectors are on the back. 

    Take a look at www.realoem.com either search your car or put the last 7 digits of your Vin into the search box it will bring up your model. Then look at the relevant  section it will have small exploded drawings that should help. Also look at www.pelicanparts.com an American site but apart from the steering wheel being on the wrong side the cars the same they have some brilliant "How To's" with pictures there may be something there that helps.

    Fuses are in the glove box awkward to see but worth checking

    Dave

    Cheers dave 

  2. 2 hours ago, Greydog said:

    Morning Paul

    Welcome to the Forum

    First has anything else been done to the car ? Jump Start any work carried out?

    I take it you have checked connections and fuse? flickering could be a loose connector, worth checking the free stuff first. Then there is the old trick of disconnecting the battery for 10 mins or so then re-connecting (acts like a hard reset with a computer) 

    If you dont have a loose connector, I would disconnect spray with contact cleaner and reconnect same with the fuse. If none of this works talk to people like Cartronix, BBA Reman, ECU testing all are experienced with repair of electronic bits, if you get your own instrument cluster repaired you should have no issues. If you get a replacement it will need coding to the car otherwise you will get a tamper dot next to the mileage.

    Hope this helps

    Dave

    Hi dave were is the connection for the dash ? Have checked fuses .is there a lead Or cable that I need to check 

×
×
  • Create New...

Forums


News


Membership