Jump to content

P0112 & P0238 Code after VRSF + Tial BOV install E93 335i


hunter
 Share

Recommended Posts

Hi, I have a completely stock e93 that was throwing a 30FF code, so I installed a new CP as well as replacing the vacuum lines that attach to the BOV. The car is driving great compared to pre-install but the check engine light came on after install, along with "engine malfunction: reduced power." I can't see how the TMAP could be failing because I have no power mods just yet, I don't think there is any possibility my boost is over 19psi. And what does the IAT (P0112) have in common with all these symptoms?

Any possibilities as to what could be causing these codes? Would really appreciate the help. 

Link to comment
Share on other sites

Morning Hunter

Welcome to the Forum

Remember that General codes 30ff and PO112 are often symptoms not necessarily the cause 

You refer to BOV ? do you have an aftermarket Blow Off Valve? the standard turbo actuators operate at 9 psi yet you refer to 19 psi. The higher the boost the hotter the intake air temp is which may well put it outside normal operating parameters and throw the code.

I would go very carefully back over the work done and check everything, vacuum line routing, make sure none are kinked absolutely no leaks.

I would also invest in a BMW capable diagnostic scanner it will give far more accurate information

Good luck sorting it 

Dave

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Latest Topics

    1. 0

      Bob Palagano

    2. 8

      E64 Main Beam not working - its not the bulbs or fuses

    3. 2

      BMW E46 330D 2005 intermittent starting fault code 4302

    4. 2

      BMW E46 330D 2005 intermittent starting fault code 4302

    5. 2

      BMW E46 330D 2005 intermittent starting fault code 4302

  • Recent Achievements

    • Congers earned a badge
      One Month Later
    • bobpalagano earned a badge
      Conversation Starter
    • Asultan97 earned a badge
      Week One Done
    • JOHN.C earned a badge
      Week One Done
    • jonbell earned a badge
      First Post

×
×
  • Create New...

Forums


News


Membership