Jump to content

I have returned!!


e46alanb
 Share

Recommended Posts

Hi all, I used to own a 3 series but I’ve now returned with a 1 series. 
I have an issue that I would be grateful if you can give me some advice please. I think these are all related:
1, I’m only getting heat on the passenger side vents.

2, it’s a bit lumpy just after release of the clutch (just not as smooth as it is when it’s warmer)

3, seems to take longer to warm up than I would expect. 
4, the engine switching to ready when stopped doesn’t happen going to work in the morning 6 1/2 mile journey, but does on the way home!

5, I have to use the air con to clear the screen .

so I’m obviously thinking thermostat, but am also wondering if it’s the splitter (think that’s what it’s called!!) or both!! 

Any help will be great please. Have a good one. 

Link to comment
Share on other sites

Hi Alan

Welcome Back 😁

Heat one side (why is it always the drivers feet that get cold ??) That will be the twin solenoid (splitter) in the engine bay. I assume you have checked the vent flaps are moving.

Lumpy after clutch release ? Could be DMF issue ?

Thermostat is a definite culprit for slow warm up and as it seems you need to change the twin solenoid you may as well change the Stat while in there 😅

I never turn my AC off so but not unusual to need AC to knock back humidity to clear the screen.

Certainly once the car is warming up faster you may find the Stop/Start operates more consistently.

A scan may help 

Good luck 

Dave

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Latest Topics

    1. 0

      Bob Palagano

    2. 8

      E64 Main Beam not working - its not the bulbs or fuses

    3. 2

      BMW E46 330D 2005 intermittent starting fault code 4302

    4. 2

      BMW E46 330D 2005 intermittent starting fault code 4302

    5. 2

      BMW E46 330D 2005 intermittent starting fault code 4302

  • Recent Achievements

    • Congers earned a badge
      One Month Later
    • bobpalagano earned a badge
      Conversation Starter
    • Asultan97 earned a badge
      Week One Done
    • JOHN.C earned a badge
      Week One Done
    • jonbell earned a badge
      First Post

×
×
  • Create New...

Forums


News


Membership