Jump to content

Power seats


Jim666
 Share

Recommended Posts

Hi jim

the loom might already be fitted and you can just plug it in. If I am right, which is not often... you can just run a 12v feed to the seat if needed, although when you switch the engine off it won’t revert back or remember settings. 
what model is your car?

my seats in thex5 have memory from the ecu so when I get in, the seat and heaters and radio and mirrors , steering wheel etc move to my preferred position. Likewise if my wife uses her key it does the same for her. 
 

this is an option if the loom is in place and the seats can be programmed for comfort entry I think it’s called. 

Link to comment
Share on other sites

Hi Jim

Check www.realoem.com put the last 7 digits of your Vin into the search box it will bring up your model then look in the Seat section it should give what options Manual, Powered or Powered with memory. If it shows the powered options it is pretty certain the loom is there, then search for the seat you want in the right colour. Heated seats may take a bit more work as you will need the switches and controller

Dave

Link to comment
Share on other sites

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership