Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

e24 front brake hub HELP!!!!!!

Ray8254

By Ray8254,
in BMW 6 Series Forum

 Share

Recommended Posts

Ray8254 Newbie

Ray8254

Posted
Posted

Hi fellas, just a quick one, i own a 1989 e24 and am thinking of upgrading the brakes. I already have wilwood  discs and calipers  on the front but as I have a set of Hi Spec  discs and calipers lying around I thought I'd throw them on for a change.My problem is that Hi Spec dont have the disc bells or caliper spacers in stock so I either need to know if the hub assembly on the e24 is shared with another model or if i can get hold of detailed drawings of the hub assembly.

They said that I could take my car down to them and I would but theres a slight issue of me living in Ireland!!

Any help would be greatly appreciated.

Link to comment
Share on other sites

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      New Front Brake Discs Recommendations

      Hi all, time for me to change my front discs on the E64. Has anyone got any experience on discs manufacturer and things to avoid. I am just going for plain vented discs as per standard spec on the vehicle. Advice always welcome
      jenksy0198 in BMW 6 Series Forum
    2. 3

      Transfer Case

      Morning Darren The obvious one is BMW ISTA/INPA not the cheapest but by far the most comprehensive and gives Dealer level access. Require a little patience to master but well worth it (my opinion) Then there are systems by Autologic, iCarsoft, Bimmerlink and Foxwell, all work well but are not as comprehensive as ISTA/INPA (mine has WIS and TIS). There are also a few systems which are Subscription led such as Carly Personally if I have tools I want to own them not rent them so I prefer to buy the complete package (on an old laptop that lives in my garage I have Diagnostics programs for Volvo, Merc, VW, and BMW. Plus an Autologic scanner and a BMW iCarsoft scanner (I am a born tinkerer and a boy needs toys) One diagnostic session at a Dealer will probably cost close to £200 plus any remedial work they can recommend?? So owning your own which will allow adaptions, registration and reprogramming work to be carried out will save £££ in the long run. Good Luck Dave
      Greydog in BMW X3 Series Forum
    3. 10

      2024 X5 with Towing package using weight distribution hitch

      Just realized that I made a mistake. The last sentence should have been: " You would plug the trailer’s 7-pin into it, then the 7-pin coming out of the controller to X5."
      Julian4285 in BMW X5 Series Forum
    4. 10

      2024 X5 with Towing package using weight distribution hitch

      Besides, I could never understand why someone would sell you something but not set it up for you to use. BMW USA is not the most logical company to talk to, just like they would advise against using WDH but could not produce documentation to support it. Fortunately my dealer was helpful when I tried to figure out the break controller wiring. They even ordered a set of plugs for me although I eventually went with the Etrailer harness.
      Julian4285 in BMW X5 Series Forum
    5. 10

      2024 X5 with Towing package using weight distribution hitch

      This vehicle comes with a plug under the dash for break controller. I’ve attached a couple pictures my dealer sent me. All you need to do is to pop the panel under the dash open to see it. You don’t need any work in the back of the vehicle. The sway controller has a receptacle for a 7-pin. You would plug the trailer’s 7-pin into it, then the 7-pin coming out of the controller to the trailer.
      Julian4285 in BMW X5 Series Forum

  • Recent Achievements

    • Week One Done
      B10Neil
      B10Neil earned a badge
      Week One Done
    • One Month Later
      B10Neil
      B10Neil earned a badge
      One Month Later
    • First Post
      Jeff1965
      Jeff1965 earned a badge
      First Post
    • Rookie
      Darrenscollins
      Darrenscollins went up a rank
      Rookie
    • Week One Done
      e87guy
      e87guy earned a badge
      Week One Done

×
×
  • Create New...

Forums

News

Membership