I’m hoping someone can shed some light on an issue I’ve been having with the rear window washer. The sprayer located behind the third brake light (in the trim above the rear window) hasn’t been working properly since I bought my X2 over a year ago. Early on, it would continue leaking water even after I turned it off but then eventually stopped.

Now it appears the nozzle may have come loose and fallen inside the trim—I can’t see anything through the opening anymore. When I activate the rear sprayer, water just leaks along the trim instead.

At the same time, my front windshield washers have also stopped working correctly. They have very low pressure, spray briefly for a second, and then stop altogether. I can still hear the pump running when I activate either the front or rear washers. (For reference, I’m using proper BMW-approved washer fluid—not silicone-based.)

So at this point, I seem to have two issues:

• Rear washer nozzle likely disconnected or hose loose inside trim

• Front washers now have little to no pressure

The vehicle is still under CPO warranty, and I plan to bring it into the BMW dealer and hopefully have this repaired at no cost.

Has anyone experienced something similar or have any insight into what might be going on?

Thanks in advance,
Lew

BMW X2 F39 Heckscheiben-Reinigungssprühdüse 61687320256 7320256 NEU Original _ eBay.html

Previous owner had coded some minor bits on the car which I wanted to revert back to stock. Seller gave me the OBD adapter after I said I wanted to reset it all they said it's easy but he would give me the OBD incase I wanted to do anything to it. 

I followed his instructions on putting things back to stock, using the OBD adapter. Everything seemed to go well other than my right rear indicator has thrown up an error on the car and doesn't work now. Also the front right headlight indicator and mirror indicator also started working differently flashing faster than before. 

The seller followed me through sorting this out, which has worked but still no rear right indicator. 

We tried several attempts while I was on the phone to get this sorted to no avail. 

Can anyone point me in the right direction to a fix please? 

James

BMW has now stopped offering the SE version across the X range, I would like to purchase a X2 which now only comes in Sport or M Sport with the extended thigh support. My wife who is only 5' finds both these cars uncomfortable to sit in. Does anyone know if a SE seat from a F48 X1 will fit directly into a X2 (both these cars are built on the same UKL2 platform)? Alternatively would a F48 SE seat squab fit onto a F39 M Sport seat frame? Many thanks

Post below 🙂